TRANSMISSION REPAIR
TRANSMISSION REPAIR OR REPLACEMENT?
In most cases, a manual or automatic can be repaired if only minimal parts and labor are required. Rebuilding or replacing a transmission is generally more expensive. An average transmission repair costs $300 to $1400. A new clutch for a manual transmission, for example, could cost approximately $800 to $1,500.
The replacement of a transmission, however, is among the most expensive automotive repairs. Transmission replacements can cost between $1,800 and $3,400. Repair shops and technicians have different labor charges, which can range from $500 to $1200. Below is an overview of the average transmission repair cost:
- Transmissions remanufactured for $1,300 to $3,400
- Used/salvage – from $800 to $1,500
- The cost of rebuilding varies from $1,100 to $2,800
TRANSMISSION PROBLEMS COMMONLY IDENTIFIED
As these machines play such an essential role, any problem should be handled as quickly as possible. Pay particular attention to:

Having difficulty shifting gears.
The shift is rough.
Slipping of the automatic transmission.
Combination of illuminated warning lights and any of the above problems.
Engagement in the "Drive" mode is delayed.
The shift is rough.
Engagement in the "Drive" mode is delayed.
HOW TO CHECK YOUR TRANSMISSION FLUID?
Catch potential damage before it becomes serious by checking your vehicle’s transmission fluid regularly. You can do this if you simply:
- Turn the car on to warm up the engine.
- Find the transmission fluid dipstick. Use your owner’s manual if you’re having trouble finding it.
- Remove the dipstick and put some of the fluid on your finger. Move it around between your forefinger and thumb. This liquid should be mostly clear with a pink hue.
- Make sure the fluid doesn’t give off a burnt smell or look dirty. If this is the case, bring your model in for a replacement.
- Wipe off the dipstick with a rag and put it back in place.
- Pull it out again to check the levels. Add more if it’s under the “Full” marking.
- Using a funnel, add more fluid until it reaches the “Full” marking.
The best way to avoid problems is to keep up with regular services, such as a transmission flush or fluid replacement. We can diagnose problems and offer solutions, as well as a wide range of genuine parts.